Legrand UPS 1f / 1f DAKER DK 10000VA, BEZ baterii, Rack 3U / Tower, On-Line, 10000V | 310058

Daker DK 10000 – Inverter (310058)

The Legrand UPS Daker DK 10000 model is an uninterruptible power source with high frequency PWM technology, Double Conversion On Line, solid neutral, Rated Power 10, 000 VA – 9, 000 W. It does not contain internal batteries but can be connected to one or more external cabinets containing valve-regulated, hermetically sealed accumulator batteries. The fact that it does not contain internal batteries reduces the dimensions of this UPS to just three rack units.
The architecture of this UPS means it can be installed in either a Tower configuration or inside Rack cabinets.The rectifier of the UPS is comprised of a control and regulating circuit (PFC), which, in addition to normal rectifier functions also:• automatically corrects the power factor of the load to restore it to a value of & gt;0.99 with a load applied at the output at 20% of the rated load;• power the inverter without requiring energy from the batteries, even when there is very low voltage from the mains;• ensures a total harmonic distorsion of the input current THDIin & lt; 3% without the addition of filters or supplementary parts.
The bypass circuit is designed and built in compliance with the following:- Electromechanical switch- Command and control logic managed by a microprocessor that:• automatically transfers the load directly onto the primary mains line without interrupting the power supply if any conditions of overload, over temperature, continuous voltage outside of the tolerances and inverter anomaly arise;• automatically re-transfers the primary mains line load to an inverter line, without interrupting the power supply, once normal conditions of the load have been restored;• if the primary mains line and the inverter are not synchronised, the bypass must be disabled.
A diagnostic and shutdown software (UPS Communicator), if accordingly installed in a PC connected to the UPS, allows you to access all of the operational data, make adjustments and settings to the special functions and control Windows and Linux operating system shutdown.An optional software (UPS management software) offers hierarchic multiserver shutdown and remote management of the UPS for any operating system in a heterogeneous network (Windows, Novell, Linux and the common Unix).
Daker DK 10000 is managed by a microprocessor and is able to display, on a control panel and LCD screen, the alarms and operating modes described below:• normal operation• output frequency that is not synchronised with the input• battery-powered operation• operation in bypass mode• faulty power module• overloaded• generic anomaly• incorrect neutral connection• back-up time• end of uptime
The Daker DK 10000 Static Uninterruptible Power Supply bears the CE marking, pursuant to Directives 73/ 23, 93/ 68, 89/ 336, 92/ 31, 93/ 68, and is designed and built in compliance with the following standards:• EN 62040-1 “General and safety requirements for UPSs used in areas that are accessible to the operator”• EN 62040-2 “Electromagnetic Compatibility requirements (EMC)”• EN 62040-3 “Performance and test method requirements”
General FeaturesNominal power (VA): 10000Active power (W): 9000Technology: On-Line Double Conversion VFI-SS-111Waveform: SinusoidalUPS architecture: convertible tower and rack 19
InputInput voltage: 230 VInput frequency: 50-60 Hz ±5% AutosensingInput Voltage Range: 160V - 288V on full loadTHD Input current: & lt; 3%Input power factor: & gt; 0.99Compatibility with Power-Supply Units: Configurable to set up synchronism between the input and output frequencies, also for broader frequency ranges, ±14%
OutputOutput voltage: 230V ± 1%Output frequency (nominal): 50/ 60 Hz (can be set from the LCD panel) +/ - 0.1%Crest Factor: 1:3THD Output voltage: & lt; 3%Output Voltage Tolerance: ±1%
BatteriesUptime Expansion: yesNumber of batteries: -Battery series Type/ Voltage: -Uptime with 80% load (min): -
Communication and managementDisplay and Signals: Four buttons and four LEDs to monitor the status of the UPS in real timeCommunication Ports: RS232 serial ports, USBRemote Management: availableNetwork interface slot: SNMP
Mechanical featuresMeasurements H x L x D (mm): 440x132 (3U) x680Battery Cabinet Measurements H x L x D (mm): 440x132 (3U) x680Net Weight (kg): 26
Environmental conditionsOperating temperature (°C): 0 ÷ 40 °CDegree of protection: IP21Relative humidity (%): 20÷80 % non-condensingNoise level at 1 m (dBA): & lt; 50Heat Loss (BTU/ h): 1636
CertificationsStandards: EN 62040-1, EN 62040-2, EN 62040-3


Najpredávanejší tovar s podobnou cenou:

• pozrite záložku Podobné modely (spolu 5)